引用本文:汪铜芳1,2,张咏梅2,李姗姗1,2,潘金火1,2,王建春2,陈晓峰2,蒋志涛2.心脑苏颗粒成型工艺优选[J].世界中医药,2017,(02):. |
|
心脑苏颗粒成型工艺优选 |
Optimization for Formation Process of Xinnaosu Granules |
投稿时间:2015-12-10 |
DOI:10.3969/j.issn.1673-7202.2017.02.044 |
中文关键词: 心脑苏颗粒 成型工艺 正交设计 |
English Keywords:Xinnaosu granules Formation technology Orthogonal design |
基金项目:张家港市中医医院青年自然科学基金项目(编号:zzyq1308) |
|
摘要点击次数: 766 |
全文下载次数: 813 |
中文摘要: |
目的:优选心脑苏颗粒成型工艺。方法:运用单因素及正交试验设计,以颗粒吸湿率、成型率、休止角作为判定依据,优化辅料种类及用量、润湿剂的浓度,以确定最佳成型工艺条件。结果:优选辅料为糊精,浸膏与辅料用量为1:1,90%乙醇作为润湿剂,干燥温度为60 ℃进行制备。结论:此法制备的心脑苏颗粒性质稳定、外观好、吸湿性小、溶化性好,可用于工业化生产。 |
English Summary: |
To optimize formation technology of Xinnaosu granules. Methods:A single factor and orthogonal experiment was designed. The particle moisture absorption rate, the forming rate and the repose angle were taken as judging conditions to optimize the type and dosage of auxiliary materials and the concentration of wetting agent. To determine the optimum molding processes conditions. Results:The dextrin was optimized as excipient. Prescription of the clear cream and excipient was set as 1:1 and 90% ethanol was set as wetting agent. The drying temperature was set as 60 degrees centigrade. Conclusion:Xinnaosu Granule prepared by this method has stable properties, excellent appearance, few moisture absorption and good dissolubility. This method can be utilized in industrial manufacture. |
查看全文 查看/发表评论 下载PDF阅读器 |